Flextronics Software Systems Placement Paper

Company: Flextronics Software Systems

Section C

1. an lead compensator zero is at Z=Zc, pole is at P=Pc then the following is correct
a. Pc > Zc, pc< 0, zc< 0
b.
c.

2. gain margin of g(s)h(s)=1/s(s+k);
a. sqrt(1+k2)
b. 0
c. infinity
d. 1

3. machestor code does not improves
a. clock recovery
b. bandwidth efficiency
c.

4. possion distribution is used for
a. used in FSM
b.
c.used for queuing delay system of mutually identical events of arrival
d. both a and c

5. no.of filpflops for mod 11 counter
a. four
b. five
c.

6. no.of filpflops for mod 11 counter
a. four
b. five
c.

7. if even parity is used for parity generation, what is the hamming distance (simple fig is given) ans:2

8. the code set is {00000,00111,11100,11011} what is the error detecting and correcting capability? ans:2,1

9. operational amp characteristics following is correct:
1. input impedance is 0
2. output impedance is infinity
3. input impedance is infinity
4. gain is infinity which combinations are correc

10. band pass signal having frequencies 2.5k and 4.5k?give the sampling freq
a. 9k
b. 4k
c. 4.5k
d. 7k

11. definition of avalanche diode multiplication

12. more no of ripples are present in the diagram?which is correct
a. lower order filter
b. high order filter
c.

13. If CPU have one interrupt pin and on to connect with external devices with some priority? which type of the following is used?
a. parallel priority interrupt
b. daisy chain
c. RS filpflop
d.

14. one megabit file transfer, serially on 9600 baud one start bit and two stop bits, then how much time it takes (approx)
a. 4 hours
b. 2 hours
c. 20 minutes
d. 2 minute

15. IEEE 802.5 is
ans: TOKEN RING

16. Code sequence is given what is the error correcting distance

17. bit stuffing used in HDLC Protocol for
ans: b is correct(read on text book)

Section A AND B (Both are mixed )

18 If “AaBbCc” is passed to the char char x(*a) { a[0]?x(a+1):1; printf(”%c”,a[0]); return 1; } what will be the output?

19 f(*p) { p=(char *)malloc(6); p=”hello”; return; } main() { char *p=”bye”; f(p); printf(”%s”,p); } what is the o/p?
ans:bye

20 hen the program counter is incremented in the instruction cycle
a. fetch cycle
b. int cycle
c. execuation cycle
d.

21 wo sorted lists of n elements will take at least fine the order of complexity?
a. 2n
b. n/2
c. square(n)

22 logic diagram is given? find the expression
ans: OR gate

23 uestion on JAVA string ans: string ends without a null character

24 ache access time is 100ns. main memory access time is 1000ns, hit ratio is .9, find mean access time?
ans :200ns

25 hich is not suitable to find out IP address
ans:ARP

26 about deadlock condition

27 convert 41.6875 into binary

28 read about IP AND IPX

29 read about NFS 30 DHCP is
a. for routing
b. for network address conversion
c. for diagnosis
d.

31 xecution phase can be
a. pipelined
b. no parallelism is possible
c. vector processing
d.

32 In public key algorithm , A wants to send message to B ….. which key is used
a. A public key
b. A private key
c. B public key
d. B private key

33 to prevent replay attacks in transmission
a. symmetric encoding
b. Asymmetric encoding
c. for every exchange, key should be changed

34 irtual functionality is used in C++
a. dynamic binding
b. if the derived func is present but base class not present
c.

35 if there are n nodes in a binary tree, how many null pointers are there
ans:n+1;

36 if heap sort contains n elements, no of comparsions required are
a. log(n)
b. height of heap sort
c.
d.

37 question on ICV(integrity check)

38 which of the following is efficient in terms of space
a. insertion sort
b. quick sort
c. selection
d. both a and c

39 in 32 bit representation, the range of numbers in 2’s complement form
ans :-2 to the power of 31 to 2 to the power of 31 minus 1

40 about normalization

41 socket is implemented in TCP Layer. which of the following is related to TCP layer ans: port number

42 in reentrant procedure, which should be not used for passing parameters?
a. passed by reg
b. by direct
c. by indirect
d. by stack

43 flow control is used for
a. congestion at receiver
b.
c.
d.

44 flow control is used for
a. congestion at receiver
b.
c.
d.
45 5 questions on DBMS are there

46 in global static variable , declartion in a file
a. localization of scope
b. persistance of the value through out the file
c.
d.

47 in sorted table contains elements , which of the searching is false
a. hash table
b. binary searching

48 in demand paging overhead of context switching is more due to
a. copy processes from disk to memory
b. viceversa
c. to get associative table
d. swapping to the disk

49 when write through is better than write back(related to cache memory)

50 which is false when normalization is used?can’t express

51 I :verification: are we doing right product II: validation:are we doing product right a. i and ii are true b. i and ii are false c. i true and ii false d. i false and ii true

52 A table contains less than 10 elements which one is fastest
a. bubble sort
b. selection sort
c. quick sort

53 about subroutine, precondition is false. what about post condition
a. post condition is not defined
b. post condition is always true
c.
d.

54 When static variables are used, which one of the following is not possible?
a. dynamic run time
b.
c.

55 in product of x and y, if(x=0|y=0) y=1; else y=0; (not cleared) what is cyclometric complexity?
a. 3
b. 2
c. 1
d. 0

56 CREATE TABLE NEW AS SELECT BIG FROM EMP The above SQL statement is correct or not? (question is not cleared)

57 path testing is
a. white box
b. black box
c. installation test
d. environment test

58 program is given? above algorithm represents what type of search?
a. binary search
b. interpolation search
c. sequential search
d. (may be “b” is correct);

59 if x->y in a relation R, x1 and x2 are in x, y1 and y2 are in y (question not cleared), about functional dependancy
a.x1=x2 and y1=y2
b.
c.

60 in a down loading from website ,which one is correct? ans: check the byte code and indicate the error, if any.

61 about UDP one Address is given but that is not the state table what will it do the packet
a. packet is discarded
b. packet is sent to ethernet server
c. packet is sent to other address
d.

62 in associated memory for fast accessing which one is used
a. single linked list
b. double ”
c. hash table

63 hich of the folowing is not correct
a. (x+y)’=x’.y’ b. (x’+y’)’=x.y
c. (x’.y’)’=x+y d. (x’+y’)’=x’.y’ [d]

64 Question on logic ckt. U have to find the output ans. AB’+CD’+EF’

65 Output of MUX
_________
c—–| |
c’—-| |——-Y
c’—-| | ans. A xor B xor C
c—–| |———
| |
A B (select lines)

66 If X and Y are two sets. |X| and |Y| are corresponding coordinates and exact no.of functions from X to Y is
97 then
a. |X|=97 |Y|=1 b. |X|=1 |Y|=97
c. |X|=97 |Y|=97 d. …..

67 If two dies are thrown simultaneously what is the prob. of one of the dice getting face 6 ?
a. 11/36 b. 1/3 c. 12/35 d. 1/36 [a]

68 The relation ,<,on reals is
a. a partial order because of symmetric and reflexive
b. … antisymmetric and ….
c. not …… .. asymmetric and non reflexive
d. … …. not anti-symm and non reflexive

69 In C language the parameters are passsed by
a. values
b. name
c.referrence
d….

70 Advantage of SRAM over DRAM
ans. faster

71 Diasy chaining related question (refer Z80)
a. uniform interrupt priority
b.non …. ….
c.interfacing slower peripherals
d…..

72 RAM chips arranged in 4X6 array and of 8kX4bit capacity each. How many address lines reqd. to access each byte
a. 12
b. 16
c.15
d. 17

73 Question related to AVL trees regarding how many no.of nodes to be changed to become balanced after addition of a leaf node to a particular node.
ans . 3

74 When following sequence is insertedin the binary search tree no.of nodes in left and right subtrees 52 86 64 20 3 25 14 9 85

75 Method used for Disk searching..
a.l inked list
b. AVL
c. B-tree
d. binary tree

76 Which of the following is correct statement.
a. 1’s complement can have two zero re[resentations
b. 2’s … … represent an extra neg. number
c. 2’s & 1’s have no difference in representing 16-bit no.
d…….

77 AX=B where A is mXn ,b&X are column matrices of order m
a. if m
b.if m=n, rank of A

78 The option avialable in C++, not C:
a. dynamic scoping
b. declaration in the middle of code block
c. seperate compiled and linked units d. ….

79 int a[4]={1,2,3,4}; int *ptr; ptr=a; *(a+3)=*(++ptr)+(*ptr++); A part of code is shown. The elements in A after the execution of this code.
a.1 2 3 4
b. 1 2 3 6
c. compilation error
d.1 2 2 4 [a]

80 Critical section program segment is
a. enclosed by semaphores with P & V operations
b. deadlock avoidance
c. where shared resources are accessed
d. …

81 when head is moving back and forth, the disk scheduling algorithm is _____
a) scan
b) sstf
c) fcfs
d)….

82 how many times the loop will execute LOOP LXI B,1526H DCX B JNZ LOOP
a) 1526H times
b) 31
c) 21
d) 38

83 the addressing mode in which the address of the operand is expressed explicitly within the instruction
a) index addressing
b) absolute
c) indirect
d) immediate

84 (A – B) U (B – A) U (A ^ C) = ? where A,B are two sets A’ , B’ are compliments of A and B
a) A U B
b) A ^ B
c)….
d)….

85 The network that does not use virtual circuit
a) IP
b) X.25
c)….
d)..

86 source routing bridge
a) source will route the frame
b) frame will routed with info in header
c)….
d)..

87 cache access time 100 msec. main memory access time 800 msec if the hit ratio is 95% , what is mean access time …

88 The module that should be always reside in main memory is
a) loader
b) link module
c)…
d)…. …. and some questions related to
1. addressing mode
2.assembler passes
3.linking and loading
4. file directory search
5. turning machine
6. finite state machine
7. daisy wheel

89 The order of algorithm to merge the two sorted lists of lengths m and n is
a. O(m)
b. O(n)
c. O(m+n)
d. O(log(m)+log(n))

90 A chocolate block is of 4 X 4 size.How many cuts are needed to make 1 X 1 size blocks. No simultaneous vert. & horz. cuts.

91 Which among the following is not correct
a. O(n) > O(log n) .. likewise

Section C

92 ne question of Set Theory Like there Are two sets A and B and (A-B)union(B-A)union(A intersection B)
is equivalent to
Ans. A union B

93 Union and intersection are in there sign conventions.

94 One question of probability Like between 100 and 999 how many no have the prob that they does not contain 7
Ans. 16/25 (not sure u can check by own)

95 Of Newton Rapson method…

96 Of power set A set contains {(fi),a,{a,b}} what is the powerset of it
Ans. 8

97 A question of logic gates
Ans. U can got the answer very easily

98 A question on the Booths algo
Ans. The sequence is 1010101010101010

99 Relative addressing mode is used for
Ans. Dont know.

100 For how many numbers there is no difference between little endian and big endian
Ans. 256

101 For the multiplication of two 8 bit numbers how much ROM will be used
Ans. 64k*16 ROM(Check it)

102 Why direct mapping is not good for the mapping of Cache Memory.
Ans. Dont know

103 What is the main property of Desiy I/O Sytem
Ans.

104 A question on the nyquist theorem
Ans. 18000 bps

105 What is the shannon theorem…
Ans. Refer to data communication(Stalling) book

106 CSMA/CD protocol is used in
Ans. Ethernet

107 What is the limitation of the Pulse Code Modulation
Ans. Refer to data communication book

108 In CSMA/CD
Ans. The Access to the channnel is probabilistic.

109 For an IP Router how many IP addresses
Ans. Check it i think Answer is Only One.

110 Which protocol u used when you want to know the IP address corresponding to a MAC Address
Ans. RARP

111 Which part of the IP header is used for the time limit of the packet.
Ans. TTL

112 Which PageReplacement algo will give the best result
Ans. By replacing that page which has the next reference after a long time.(optimal algo)

113 What the code will be said when it is called by another part and it is not completed yet
Ans. Reentrant Code.

114 three questions on the simple programs

115 There is a sequence of no and prepare a binary tree and tell how many nodes are in the left and right sub tree.
Ans. Check it Ans (4,7)

116 hat is the rank of the graph
Ans. e-n+k

117 One question on the multithreading

118 Which traversal of the tree gives the node in the ascending order.
Ans. Inorder

119 Which traversal of the tree gives the node in the ascending order.
Ans. Inorder

120 What is garbage collector.

121 lead compensator zero is at Z=Zc, pole is at P=Pc then the following is correct
a. Pc > Zc, pc< 0, zc< 0
b.
c. 122 gain margin of g(s)h(s)=1/s(s+k);
a. sqrt(1+k2)
b. 0
c. infinity
d. 1

123 machestor code does not improves
a. clock recovery
b. bandwidth efficiency
c.

124 possion distribution is used for
a. used in FSM
b. c.used for queuing delay system of mutually identical events of arrival
d. both a and c

125 no.of filpflops for mod 11 counter
a. four
b. five
c.

126 no.of filpflops for mod 11 counter
a. four
b. five
c.

127 if even parity is used for parity generation, what is the hamming distance (simple fig is given) ans:2

128 the code set is {00000,00111,11100,11011} what is the error detecting and correcting capability?
ans:2,1

129 operational amp characteristics following is correct:
1. input impedance is 0
2. output impedance is infinity
3. input impedance is infinity
4. gain is infinity which combinations are correc

130 band pass signal having frequencies 2.5k and 4.5k?give the sampling freq
a. 9k
b. 4k
c. 4.5k
d. 7k

131 definition of avalanche diode multiplication

132 more no of ripples are present in the diagram?which is correct
a. lower order filter
b. high order filter
c. 133 If CPU have one interrupt pin and on to connect with external devices with some priority? which type of the following is used?
a. parallel priority interrupt
b. daisy chain
c. RS filpflop
d.

134 one megabit file transfer, serially on 9600 baud one start bit and two stop bits, then how much time it takes (approx)
a. 4 hours
b. 2 hours
c. 20 minutes
d. 2 minute

135 IEEE 802.5 is
ans: TOKEN RING

136 Code sequence is given what is the error correcting distance

137 bit stuffing used in HDLC Protocol for
ans: b is correct(read on text book)

Section A AND B (Both are mixed )

138 “AaBbCc” is passed to the char char x(*a) { a[0]?x(a+1):1; printf(”%c”,a[0]); return 1; } what will be the output?

139 f(*p) { p=(char *)malloc(6); p=”hello”; return; } main() { char *p=”bye”; f(p); printf(”%s”,p); } what is the o/p?
ans:bye

140 when the program counter is incremented in the instruction cycle
a. fetch cycle
b. int cycle
c. execuation cycle
d.

141 two sorted lists of n elements will take at least fine the order of complexity?
a. 2n
b. n/2
c. square(n)

142 logic diagram is given? find the expression
ans: OR gate

143 question on JAVA string ans: string ends without a null character

144 cache access time is 100ns. main memory access time is 1000ns, hit ratio is .9, find mean access time?
ans :200ns

145 which is not suitable to find out IP address
ans:ARP

146 about deadlock condition

147 convert 41.6875 into binary

148 read about IP AND IPX

149 read about NFS 150 DHCP is
a. for routing
b. for network address conversion
c. for diagnosis
d.

151 execution phase can be
a. pipelined
b. no parallelism is possible
c. vector processing
d.

152 In public key algorithm , A wants to send message to B ….. which key is used
a. A public key
b. A private key
c. B public key
d. B private key

153 to prevent replay attacks in transmission
a. symmetric encoding
b. Asymmetric encoding
c. for every exchange, key should be changed

154 irtual functionality is used in C++
a. dynamic binding
b. if the derived func is present but base class not present
c.

155 if there are n nodes in a binary tree, how many null pointers are there
ans:n+1; 156 if heap sort contains n elements, no of comparsions required are
a. log(n)
b. height of heap sort
c.
d.

157 question on ICV(integrity check)

158 which of the following is efficient in terms of space
a. insertion sort
b. quick sort
c. selection
d. both a and c

159 in 32 bit representation, the range of numbers in 2’s complement form
ans :-2 to the power of 31 to 2 to the power of 31 minus 1

160 about normalization

161 socket is implemented in TCP Layer. which of the following is related to TCP layer
ans: port number

162 in reentrant procedure, which should be not used for passing parameters?
a. passed by reg
b. by direct
c. by indirect
d. by stack

163 flow control is used for
a. congestion at receiver
b.
c.
d.

164 flow control is used for
a. congestion at receiver
b.
c.
d.

165 5 questions on DBMS are there 166 in global static variable , declartion in a file
a. localization of scope
b. persistance of the value through out the file
c.
d.

167 in sorted table contains elements , which of the searching is false
a. hash table
b. binary searching

168 in demand paging overhead of context switching is more due to
a. copy processes from disk to memory
b. viceversa
c. to get associative table
d. swapping to the disk

169 when write through is better than write back(related to cache memory)

170 which is false when normalization is used?can’t express

171 I :verification: are we doing right product II: validation:are we doing product right
a. i and ii are true
b. i and ii are false
c. i true and ii false
d. i false and ii true

172 A table contains less than 10 elements which one is fastest
a. bubble sort
b. selection sort
c. quick sort

173 about subroutine, precondition is false. what about post condition
a. post condition is not defined
b. post condition is always true
c.
d.

174 When static variables are used, which one of the following is not possible?
a. dynamic run time
b.
c.

175 in product of x and y, if(x=0|y=0) y=1; else y=0; (not cleared) what is cyclometric complexity? a. 3
b. 2
c. 1
d. 0

176 CREATE TABLE NEW AS SELECT BIG FROM EMP The above SQL statement is correct or not? (question is not cleared)

177 path testing is
a. white box
b. black box
c. installation test
d. environment test

178 program is given? above algorithm represents what type of search?
a. binary search
b. interpolation search
c. sequential search
d. (may be “b” is correct);

179 if x->y in a relation R, x1 and x2 are in x, y1 and y2 are in y (question not cleared), about functional dependancy
a.x1=x2 and y1=y2
b.
c.

180 in a down loading from website ,which one is correct? ans: check the byte code and indicate the error, if any.

181 about UDP one Address is given but that is not the state table what will it do the packet
a. packet is discarded
b. packet is sent to ethernet server
c. packet is sent to other address
d.

182 in associated memory for fast accessing which one is used
a. single linked list
b. double ”
c. hash table
d.

183 nice(’val’)? unix command

184 for(l=1;a<=l;a++) cout<<++a;cout< output?
a.21
b.22
c.23
d.none

185nt a[4]={1,2,3,4}; array to the pointer?
a.int *a[4]
b.int (*a)[4]

186valid system prievlage in restricted seesion?
a. create user
b. create session
c. restricted session

187emaphore?
a. shared memory
b…….

188Semaphore?
a. shared memory
b…….

189which is used to store hard disk sector info
a. eerom
b. rom
c . ram
d. cmos

190If duplicate segments , file are there in hardisk which is best for management
a. fat
b. san
c. raid(may be)
d………..

191If a lan with 100mbps is there which wan can give same features?
a. atm
b. isdn
c. x.25
d. ….

192 IPv6 has how many bytes for its address?
a. 8
b. 12
c. 16

193Sliding window in which layer?
a. session layer
b. transport layer
c. application layer
d. presentation layer

194when interupt occurs to cpu what happen? 195DEBUG trigger (oracle) 196order of insertion sort and Heap sort?
a. O(n**2),O(nlogn)
b………

197NEXTVAL and CURRENTVAL in sequence (Oracle)?

198Which one is called family tree?
a. B+
b. Binary
c. AVL

199Intel 386 support which memory management?
a. paged
b. segmented
c. paged segmented
d……..

200Complexity to access name from the given double link list? |A|–>|B|
| |<–| |
a. O(n)
b. O(n**2)
c. O(nlogn)

201 question on virtual function and overloading? 202 question to find error in this C++ code.

Flextronics Software Systems Placement Paper

About Flextronics Software Systems

Flextronics Software Systems Limited is a Public incorporated on 30 December 1991. It is classified as Non-govt company and is registered at Registrar of Companies, Delhi. Its authorized share capital is Rs. 300,000,000 and its paid up capital is Rs. 165,359,008. It is inolved in Software publishing, consultancy and supply [Software publishing includes production, supply and documentation of ready-made (non-customized) software, operating systems software, business & other applications software, computer games software for all platforms. Consultancy includes providing the best solution in the form of custom software after analyzing the user?s needs and problems. Custom software also includes made-to-order software based on orders from specific users. Also, included are writing of software of any kind following directives of the users; software maintenance, web-page design].

Flextronics Software Systems Limited’s Annual General Meeting (AGM) was last held on 07 August 2007 and as per records from Ministry of Corporate Affairs (MCA), its balance sheet was last filed on 31 March 2007.

Read More